Veegate, Anti Terrorism Equipment, Perimeter/other, Australia



Send to Friend
You are here :

Home

>

perimeterother

>

Anti-terrorism-equipment

>

Veegate

Veegate

Veegate

Product Code : D930

High security Swing gate
15 Second opening time
PAS68 and K12 certified to 7500kg at 80km/h
 

 

 

 

 

 

 

 

 

Page 1 2 3 4 5
Enlarge
Electricallyoperated,Crash Tested, High Security, VeeGate with a 4m clear opening and a nominal height of 1.8m
he Model 930 VeeGate has been impact tested at the United Kingdom Transport Research Laboratory using a 7.500Kg ballasted truck at a speed of 80Km/hr and achieved a classification to PAS 7500/80/0/0, and has also been certified by the United States Department of State (DOS) to K12.
The unique and innovative design of the VeeGate allows rapid operating times, (typically 15 seconds) whilst it’s hydraulic drive system accommodates high duty applications. Any impact is transferred to the gate posts by six V section impact brackets specifically designed to dissipate the forces to the gate post and ultimately to the unique star foundation steelwork.
The gate is a purpose built unit which provides an imposing and robust vehicle attack face. The gate frames consist of RHS grade S355 steel with an impact beam located 600mm from ground level. The gate is infill is CHS tubular steel and the front face of the gate will be clad with 25mm x 75mm x 3mm weldmesh
The gate posts are manufactured in RHS grade S355 locally reinforced in the impact dissipation areas with 10mm plate. The gate base plates have eight M30 High Tensile Bolt fixing down positions. The gate hinges are substantial structures consisting of four 50mm diameter pins located in heavy duty deep groove ball bearings permanently sealed for reliability during service.
An underground steel sub-structure provides a unique foundation fixing frame which provides enormous strength to the overall gate design. This replaces the more traditional and expensive fabricated rebar reinforcement system and allows quick and easy installation once the star frame is in place. The foundations are 600mm deep which allows installation in sites where conditions prohibit more traditional foundations.
The gates are operated with two hydraulic cylinders located at high level for security. Hydraulic hoses are hidden within the gate posts and run directly to the power pack operating system, which is located within a secure IP55 enclosure sited within 15 metres of the gate base. The gates can be operated by all forms of access control equipment, opening and closing times are approximately 15 seconds.
The gates are locked in the closed position with a mechanical hook lock which prevents either of the leaves from opening if a forced entry is attempted. The gate can only be opened when the correct leaf opening sequence is activated.
Gate Protection and finish will be as follows: Shot Blast to SA 2.5, Hot Zinc Metal Spray,
Powder coated using a manual electrostatic powder unit to a dry film thickness of 60 - 80 microns and stove off at 200 deg c metal temperature for 10 minutes.
The gate can be offered in any standard RAL colour. Special colours can be supplied if specified at time of order.
  File Title
Veegate brochure Veegate brochure (675.43 KB)
 
No videos for this product.

Leda Security, Sydney, Melbourne, Brisbane, Adelaide, Perth, Australia

Web Company
|
Nsw Web Designers
|
Nsw Seo Company
|
Web Master
|
Expert Seo

18th May 2012