Vehicle Barrier Bar, Anti Terrorism Equipment, Perimeter/other, Australia



Send to Friend
You are here :

Home

>

perimeterother

>

Anti-terrorism-equipment

>

Vehicle Barrier Bar

Vehicle Barrier Bar

Vehicle Barrier Bar

Product Code : VBB

Fast operation of 3-5 seconds
Tested to 7500kg at 80km/h

 

 

Page 1 2 3 4 5
Enlarge
The Vehicle BarrierBarprevents Vehicle Borne Improvised Explosive Devices (VBIEDs - car and truck bombs) from penetrating a secure perimeter.
The VBB has a rapid rate of deployment between three and five seconds. This can be decreased to about one second with the addition of the optional Emergency Fast Operation (EFO) control. The VBB utilizes a hydraulically actuated, reinforced horizontal bar that is stowed below the road surface to permit vehicles to pass over it. Hydraulic Actuators are located at either end of the Bar.
To secure the perimeter, the Reinforced Bar is raised from the cavity to the deployed position approximately 30" (76cm) above the road surface. When the Bar is deployed, resistance to vehicle intrusion is provided by the Reinforced Bar. The continuous tensile members are secured to the drive ends at each end of the Bar. The drive ends are anchored to the footing via embedded anchor bolts.
The hydraulic supply can be installed separate from the barrier, in which case, the hydraulic lines run from the hydraulic supply to the Barrier via hoses in underground trenches. Alternatively, the Hydraulic Supply can be connected directly to the Barrier to minimize the need for trenches. The Hydraulic Supply can operate from a variety of electrical power sources and is provided with all required fusing and protection. In the event of a power failure, the bar can be deployed manually with the Emergency Over-Ride Hand Pump.
The Application
Typical applications include protection of embassies, government buildings, military bases, public utilities, nuclear plants and financial institutions.
The VBB is a US DOS certified.
Key features:
·DOS Certified to K4 and K12
·Immediate response to threat vehicles moving at high speed.
·Proven stopping power: 15,000lb (6,820kg) vehicle travelling at up to 50mph (80kph).
·Unobtrusive design, architecturally appealing.
·Fast operation time (less than five seconds).
·No below-grade Actuators, Pumps or Limit Switches.
·Excellent access to components for easy maintenance.
·Remote one-push activation.
·Reliable operation in extremes of cold or hot climates.
·Weather resistant against rain, snow, ice and sand.
·Full customized design, supply, installation and commissioning service.
Additional Information
A variety of installation options are available for the Vehicle Barrier Bar (VBB). Depending on which method is chosen installation can range between a few hours and two days:
·Surface Mount - above-grade, ballast, no excavation required.
·Shallow Mount Base Frame – low profile footing, requires minimal excavation, less than 30" (76cm) deep.
·Deep Mount Base Frame – sub-surface, concrete footing, deep excavation required 77" (183cm).

British Rating : -
Vehicle Weight (tonne) : 6820
Vehicle Speed (kph) : 80
American Rating : K4 and K12
Vehicle Weight (lbs) : 15000
Vehicle Speed (mph) : 50
Height (mm) : -
Diameter (mm) : -
  File Title
Vehicle Barrier Bar flyer Vehicle Barrier Bar flyer (251.86 KB)
 
No videos for this product.

Leda Security, Sydney, Melbourne, Brisbane, Adelaide, Perth, Australia

Ecommerce Builder
|
Web Designers Nsw
|
Nsw Web Designer
|
Search Engine Optimisation Services
|
Ecommerce Website

18th May 2012