Biparting Cantilever Gates, Sliding Gates, Gates, Australia



Send to Friend
You are here :

Home

>

gates

>

Sliding-gates

>

Biparting Cantilever gates

Biparting Cantilever gates

Biparting Cantilever gates

Product Code : Biparting gate

Great for large span driveways
Operate independently or synchronized
Bi-parting gates can be cantilever or track
You can have a central Island with receiving post or the gates can meet each other in the middle.
 

 

 

 

 

 

 

 

 

 

 

 

Page 1 2 3 4 5
Enlarge
Great for large span driveways
Operate independently or synchronized
Bi-parting gates can be cantilever or track
You can have a central Island with receiving post or the gates can meet each other in the middle.
Cantilever gates and access control mechanisms shall be as designed and manufactured by Leda-Vannaclip Pty Ltd or approved alternative. Any approved alternative shall satisfy the criteria stipulated in this specification.

Widths
Driveway width is clear span __ mtrs (enter your driveway width. Width will vary from 4 to 18mtrs).
Each Canitlever gate is to be clear span __ (enter gate widths which 1/2 driveway width)

Material
HD Galvanised steel RHS sections to AS1163-C350LO/C450LO manufactured in accordance to Leda-Vannaclip's working drawings.

Finish
Hot Dipped Galvanized or
Wet Pack spray 2 pack with initial sand blast.

Configuration
Refer to Leda-Vannaclip's section for drawing "Automatic Cantilever Gate" showing general gate appearance, elevation, and plan views.


Gate Motor options
Mid tier gate motor
A mid tier gate motor is still an Industrial quality motor. It is suited for gates operated less frequently such as those gates that are opened during trading hours and closed in the evening.

Top tier gate motor
Gate will be required to operate a minimum of 100 operations per day. Opening speed shall be 500mm+ per second. Closing speed to be 200-400mm second. Motor shall be 240V and housed in a cabinet with isolation switch to meet Australian Electrical Standards. Cabinet size to be at least 700mm high to enable space for access control equipment to be house in gate cabinet.
100% duty cycle
.75kW 3 phase drive motor (only 240v required at control box)
Cast iron gear box
Variable speed up to 630mm per second opening normally 300mm/sec on closing
Internal limit switches with easy set cams
Adjustable linear force up to 100kg
48Nm output torque limiter for extra safety


Electrical
240V mains power is required to the gate control cabinet.

Safety
Gate to be fitted with PE Beam
Option of road loops, flashing lights, siren, bump strips, curtain beams.

Foundation
Concrete and reo foundation design must be certified by a qualified structural engineer to meet relevant portions of the Building Code of Australia and relevant Standards Australia codes for structural adequacy in particular AS 1170, AS 2870, and AS 3600.
Shop Drawings
Provide fully detailed and dimensioned shop drawings for all gates from a computer generated design pacgage.
Drawings to submitted for client approval prior to fabrication.

Warranties
Provide manufactures and installers warranties for all gates and mechanisms. Warranty period shall be 1 year.
  File Title
Biparting Cantilever gates What to look for in a gate? (1.14 MB)
Biparting Cantilever gates What to Look for in a Gate (1.14 MB)
Biparting Cantilever gates Leda Gates Cantilever (1.44 MB)
 

Leda Security, Sydney, Melbourne, Brisbane, Adelaide, Perth, Australia

Sydney Best Seo
|
Web Construction
|
Expert Seo Sydney
|
Simple Cms
|
Website Programmer

18th May 2012