High security installation

  July 15th, 2015 | Bollard news, High security news

Leda’s Queensland Branch recently completed a high security installation of security gates, bollards and boom gates for a high security project on the Gold Coast.

The front of the office was identified as the most vulnerable to attack so a row of PAS68 bollards were installed 3 meters from the office facade’s. Landscaping and low reinforced walls were also employed to prevent vehicle ingress. The PAS68 bollard footings and low reinforced wall footings were interlocked to form a continuous footing. A high Impact rating was achieved with the PAS 68 bollards. Stainless Steel sleeves finished the bollards to the high corporate standard of the building.

A secure yard with separate entry and exit gates and a emergency manual gate were also required. Leda Security opted for an engineered solution for the entry/exit gates based on the High Security TMSH sliding gates. Engineered footings for these gates were tied back into the 3m high security perimeter fence eliminating any weak points. Australian made GDS motors with steel rack & pinion provided anti tampering features along with solid infills at the bottom of the gates.

high security installationThe emergency exit manual gate was clad in a colour bond finish to match the perimeter fence.

The customer also asked Leda to provide personnel security gates to the secure yard and a building egress which had to have SCEC approved electric strikes. PSWSC Personnel security gates were selected for these locations. Our customer was happy with the solid feel that the PSWSC gates provided.

1300 780 450